[Printing area] Dialog Box
Settings related to the printing area using the peel-off ink or areas not to be printed using all YMCKUV inks.
Rectangular region
Printing area information.
X
X coordinate that indicates the start of the area. (Unit: mm).
Y
Y coordinate that indicates the start of the area. (Unit: mm).
W
Width of the printing area. (Unit: mm).
H
Height of the printing area. (Unit: mm).
Ink
Ink valid for the printing area.
- 1. Peeloff:
Area for printing using the peel-off ink.
- 2. YMCK:
Area not to be printed using all YMCKUV inks.
Side
The side of the card for which the printing area is valid.
[Add] button
Registers the input data. You can enter up to 8 input data.
[Delete] button
Deletes the information selected in the list.
[Delete All] button
Deletes all registered information.
Peeloff ink energy
Print density of the peel-off ink.
Do not alter the following values.
- E1: 225
- E2: 160
- E3: 160
Setting values
The following requirements must be satisfied.
The following values are recommended when peel-off printing is performed on the ISO magnetic stripe area of the card.
| X | Y | W | H | Ink | Side |
|---|---|---|---|---|---|
|
0 |
0 |
87.46 |
17.86 |
1. Peeloff |
1. Front |
|
0 |
0 |
87.46 |
21.42 |
2. YMCK |
1. Front |
Cautions
The input value of the textbox may differ from the value of the “Printing area information” portion by an accidental error in calculation.
Close
Memo
The printing start position displayed on the application software may not coincide with the X=0, Y=0 position above.
About 1 mm from the edge of the image is not printed on the card.
About 1 mm from the edge of the image is not printed on the card.
Close