Operating the Printer

Security Lock

  • The security lock function can be applied to the printer door and card hopper to prevent opening of the printer door as well as removal of cards.
  • The lock can be turned on/off using the status monitor on the computer.
Status monitor
  • By registering a security key number on the printer unit, you can turn off the security lock by entering the security key number on the operation panel of the printer.
  • If you forgot the security key number, please consult our authorized dealer or the servicing personnel.
Registration of Security Key Number
  • To change the security key number, you have to delete it and register a new number again.
Press the operation button (center) for at least three seconds
  • A [Set Sec-Key OK?] message appears.
Raedy_no
Press ENTER
  • A [New key] message appears.
Set_sec-key
Enter a number
New_key2
  • You can enter up to 8 digits.
  • Pressing Down each time advances to the next number.
  • Pressing Right_yajirushi each time advances to the next digit.
Press ENTER
  • A [Re-enter] message appears.
New_key
Input the number you have entered in [New key] again
Re-enter2
Press ENTER
Re-enter
  • If this number is consistent with the number entered in [New key], the display returns to [Ready], and the security key number is registered.
  • If this number is not consistent with the number entered in [New key], the display returns to [Set Sec-Key OK?]. Enter a number again.
Close
Deactivating the Security Lock
  • When a security lock is turned on, you can deactivate it as follows.
Press the operation button (center) for at least three seconds
  • A [Unlock Sec-Key OK?] message appears.
Raedy_no_lock
Press ENTER
  • A [Key for unlock] message appears.
Unlock_OK
Enter the registered security key number
Unlock_sec2
  • Pressing Down each time advances to the next number.
  • Pressing Right_yajirushi each time advances to the next digit.
Press ENTER
Unlock_sec
  • If this number is consistent with the registered number, the display returns to [Ready], and the security lock is deactivated.
  • If this number is not consistent with the registered number, the display returns to [Unlock Sec-Key OK?]. Enter a number again.
Close
Deleting the Security Key Number
  • You can delete a registered security key number as follows.
  • To change the security key number, you have to delete it and register a new number again.
Press the operation button (center) for at least three seconds
  • A [Unlock Sec-Key OK?] message appears.
Raedy_no
Press Next to set to [Delete Sec-Key OK?]
Unlock_next
Press ENTER
  • A [Key for DEL] message appears.
Delete_OK
Enter the registered security key number
Key_DEL2
  • Pressing Down each time advances to the next number.
  • Pressing Right_yajirushi each time advances to the next digit.
Press ENTER
Key_DEL
  • If this number is consistent with the registered number, the display returns to [Ready], and the security key number is deleted.
  • If this number is not consistent with the registered number, the display returns to [Delete Sec-Key OK?]. Enter a number again.
Close
Return to top page